Please be sure to select either "Type A" / "Type B" / "Type C" for "Center Cluster Panel Shape".

Type A

You can identify it by the shape of the steering wheel and the shape of the center air vent. The top and bottom panels are one piece and smooth.

Type B

The steering wheel shape is the same as A, but you can distinguish it by the center air vent and the black plastic shape around the protruding monitor.

Type C

Identify it by the steering wheel shape and the central air vent, which extends to the left and right of the monitor.

The meter hood part is not included in the dashboard cover. The 595 has a genuine meter hood and black Alcantara. In addition to the genuine plastic meter hood, we have a separate lineup of retrofitted meter hood covers for both models before and after minor changes.

<Additional Charges>

1. For the main color (large area), we recommend the stock color black. Other colors will be ordered each time, so it will be an additional price of +5000 yen. There are fewer color options for Alcantara. (September 2021).

2. Since it is a light part, it is designed on the assumption that the dash mat will bounce up when the airbag is deployed in the event of an accident. However, we also receive requests for an opening for airbags. In that case, the installation of the opening will be +10000 yen. The fourth linked Instagram image shows a video that shows the structure and movement of the opening.

3.It is limited to right-hand drive vehicles, but if the boost meter is installed on the dashboard as genuine, it is possible to drill a hole to escape this part. There are some people who do not need to relocate the boost meter and drill holes, so it is selective. If you need to drill a hole, it will be +3000 yen.

<About Mounting>

There are no detailed installation instructions. All you have to do is put it on, but the dough allowance protrudes under the meter hood, so if possible, remove the meter hood once (it is fastened with a star-shaped screw). Before removing the meter hood, it is necessary to disassemble the column. If it is difficult to remove the meter hood, please pay for it. In that case, if you plunge into it and the depth direction hits the back, cut off the unnecessary part and adjust it. Double-sided tape is included, so please apply it to the minimum amount where you think it is necessary.